Et laserhegn består af en sender- og en modtagerdel, som placeres over for hinanden med en rækkevidde på op til 30 meters udendørs eller 90 meter indendørs. Enhederne sender/modtager usynlige og ufarlige laserstråler mellem sig. Hvis en stråle bliver brudt, bliver der givet besked til et relæ, som derefter kan aktivere alarm, lys eller andet.
Laserhegnet er sabotagesikkert, hvilket vil sige, at relæet får besked, hvis én af hegnets dele forsøges afmonteret eller ødelagt.
Sammenkobling med HouseGuard GSM-alarm
Ved hjælp af en HouseGuard-dørkontakt kan laserhegnet kobles sammen med et TrueGuard- (eller HouseGuard) alarmsystem. Bliver laserstrålen brudt, vil alarmen gå i gang og ringe op/sende SMS?er til alle på opkaldslisten.
Egenskaber
- Indbyggede lysdioder sørger for, at de to enheder let kan monteres over for hinanden.
- Automatisk gain-kontrol: Enhederne justerer løbende selv strålestyrken ud fra temperaturforholdene.
- Kan benyttes i temperaturer fra -25o C til 55o C.
- Justerbar følsomhed, så fejlalarmer undgås
Specifikationer (på engelsk)
MODEL | AN900-A30 | Detection method | Infrared photoelectric | Range | Outdoor | 30m | Indoor | 90m | Beam characteristics | Pulsed infrared dual beams | Interruption period | 50~700msec(selectable) | Power input | DC12~24V/AC11~18V | Current consumption | 40mA max | Alarm period | 2Sec(±1)nominal | Alarm output | Form C relay (AC/DC30V 0.5A max) | Tamper switch | N.C.Opens when cover is removed (receiver only) | Operating temperature | -25?~ 55? | Environment humidity | 95% max | Alignment angle | ±5°vertical,±90°horizontal | Mounting | Wall or pole | Weight | 300g(Both transmitter and receiver) | Appearance | PC Resin(Black) |
|
Design Durability
Highly Durable and Heat-Resistant Housing Cover and Chassis. The housing cover and chassis provide higher durability against shocks, high temperatures, and many other harsh environmental conditions.
Frost and Dew Protection
An anti-frost and convex visor design is incorporated to protect the detector from effect of frost and dew.
High Grade Aspherical Lens
The high grade Aspherical lens creates more sharply defined and precise infrared beams compared to ordinary fresnel lenses.
99.5% Beam Blocking stability
Stable operation is maintained with asmuch as 99.5% of the beam's energyblocked by heavy rain,dust storms,Snow or fog.
Twin Synchronized Pulsed Beams Designed for Greater Stability
"And Gate" dual beams require simultaneous interruption of both beams to trigger an activation. No activation is generated when a bird or falling leaves break just one beam.
Adjustable Beam Interruption Period
The Beam Interruption Time (the amount of time a beam must be broken for an alarm to occur) can be adjusted to fit any application. For example, when protecting a wall or fence, a longer interruption time will catch intruders, but let jumping cats pass through without setting off an alarm.
Quick optical and voltage alignment to speed up positioning
A conveniently placed viewfinder allows for easyalignent even in some of the most difficult mounting situations. In the receiver there are two holes indicating for voltage measuring.Fine the beam and use a voltmeter to measure the voltage until the suggested value appears. The rotating dial and voltage measuring allows the installer to finely adjust the beam easily horizontally ( 180/ 90) or vertically ( 10/ 5).
A.G.C. (Automatic Gain Control) Circuit
The A.G.C. Circuit continually monitors forgradual changes in the signal's strength caused by changing weather conditions. It adjusts the sensitivity accordingly to maintain the proper signal level for the current Environmental conditions.
